To assemble, cut the desired length of two pieces of wire. To make a pendant, cut two nine-inch pieces. Twist together three times at the center to secure. Place the twisted portion on the side of the stone.
Where the top two pieces of wire meet, twist together to secure tightly. Do the same to the bottom two pieces.
Take the remaining wire; lay one piece over the other, on the back side of the stone, and twist together. Repeat this step with the remaining two pieces of wire but place them on the front of the stone.
Take the twisted pieces from the back and the twisted pieces from the front and bring them together at the top of the stone. Twist them so that the stone is encased within the wire.
Use the handle of a small paintbrush to roll the adjoining top wires to make a loop. Wrap the additional wire around itself to strengthen the loop and cut off the excess. Use your needle-nosed pliers to twist the wires together even more.
Place a chain necklace through the loop to create a necklace.
That's it! Before you know it, you'll have stunning, one-of-a-kind jewelry pieces that your friends and family will adore for years to come!
If you loved this DIY, be sure to share it with your friends on Facebook!